Quick Start Guide
Insert Battery - Open battery door
and install battery.
Record - Slide the record switch for-
ward. Recording starts in 3 seconds.
1
2
3
4
5
6
Turn Off - Once you have finished
recording slide the switch to the
off position.
Install Micro SD Card - Insert Micro
SD card. Close the back door.
Download & View Video - To download
video simply remove your Micro SD
Card & plug it into your computer.
Mount Your Camera - Mount the camera
where needed on your helmet, handle
bar, vehicle etc. with the mounts
supplied or purchased.
You can also plug your camera into
the computer and slide the REC switch
to the ON position.
midlandusa.com
Welcome to the XTC Action
Camera Experience
Thank you for your purchase of the XTC300 Action Camera. As some-
one who seeks adventure, we are proud to offer you the ultimate tool in
capturing and recording your adventures. With easy to use one switch
operation, 127 degree angle lens and 4 hour battery life you never miss
a minute of the action. Once captured, simply connect to your computer
and upload the videos to share with friends. It is that simple. Enjoy!
XTC300 Features and Controls
1080p Features:
720p Features:
480 Features:
- 30 frames per second
- 127 degree angle
- 16:9 aspect ratio
- 1920 x 1080 resolution - 1280 x 720 resolution
- Records as mp4
- 60 frames per second - 60 frames per second
- 170 degree angle
- 16:9 aspect ratio
- 170 degree angle
- 16:9 aspect ratio
- 848 x 480 resolution
- Records as mp4
- Records as mp4
What’s in the Box
Lens
Microphone
Track for Mounting
Accessories
RECORD Switch
Forward On/ Record
XTC300 Package Includes:
1. Midland XTC300 Camera
2. USB Cable
3. Lithium-Ion Battery Pack
4. Goggle Mount
5. Helmet Strap Mount
6. Helmet Adhesive Mount
(includes 2 3M adhesive pads)
7. Bicycle Handlebar Mount
8. USB DC adapter
XTC-350 Package Includes:
1. Midland XTC-350 Camera
2. USB Cable
3. Lithium-Ion Battery Pack
4. Visor Mount
5. Tree Mount
6. Bow Mount
7. Bicycle Handlebar Mount
8. USB DC adapter
9. USB AC adapter
RECORD Switch
Backward Stop
Recording/OFF
Record LED
Flashes RED when
Camera is Recording
SD Card LED
Battery LED
10. Submersible Case
*XTC-350 accessories not shown
9. USB AC adapter
10. Submersible Case
SD card
Mini USB
Reformat Button
Connector
HD/SD Mode
Switch
Micro SD Card Slot
3
Getting to Know the XTC300
Getting to Know the XTC300
Battery
Recording
1. To insert the battery, push down the battery door latch on the back of
1. Move the RECORD switch forward. This turns the camera on.
2. The battery and SD card indicators will illuminate. The camera is
capturing audio and video when the REC indicator is flashing.
3. To stop recording, move the RECORD switch back to the off position.
the camera.
2. Pull battery door backwards to open.
3. Install Lithium-Ion battery, observing proper direction.
4. Return battery door and click into place.
SD card LED
Meaning
Status
Green
75% more available.
33% - 74% available.
Orange
Less than 33%
or no Micro SD
card installed.
Red
Flashing Red
Cannot read the card.
Battery Status
Meaning
Indicator
Indicates card is being
reformatted.
Flashing Green
Solid Green
Blinking Green
Solid Orange
Solid Red
Indicates full battery life
Battery is charging
1080p Record 720p Record 480p Record
Time
Memory Size
Time
Time
Medium battery life
512 MB
1 GB
7.5 Minutes
15 Minutes
30 Minutes
60 Minutes
120 Minutes
240 Minutes
480 Minutes
6.5 Minutes
13 Minutes
26 Minutes
52 Minutes
10 Minutes
20 Minutes
40 Minutes
80 Minutes
Indicates low battery life
Too low to operate
Blinking Red*
No Light
2 GB
Batteries are depleted.
4 GB
*Note: When the red battery LED begins blinking, be prepared
to charge the battery because the camera will stop recording
at this point.
8 GB
104 Minutes 160 Minutes
208 Minutes 360 Minutes
416 Minutes 720 Minutes
16 GB
32 GB
Micro SD Card
1. Lift latch on back to open the door
Note:
2. Insert Micro SD card into slot observing proper direction (shown below).
3. Close door until it clicks shut
1. The camera automatically splits the video into 2 GB segments.
2. HD video requires class 4 micro SD card to record and
playback
4
Camera Mounting and Aiming
Mount on Dual Track System
Camera Mounting and Aiming
Mount using the Thread Mount
On the bottom of the XTC300 is a standard thread mount that allows
the camera to be mounted to a tripod or other fixture with a 1/4-20
(1/4” diameter, 20 threads per inch) 5/16 deep thread. The vented
helmet strap mount is a screw type mount. To affix the camera, insert
the screw on the mount into the camera thread and rotate the camera
clockwise to tighten down onto the screw.
The XTC300 was innovatively designed with an identical dual track
mount system on either side of the camera. This allows you to mount it
on both sides of a helmet with ease. In addition, the main mount piece is
interchangeable and can be moved from the helmet mount to the goggle
mount. This eliminates the hassle of having to remount the camera
every time.
To mount the camera on the main mount piece, slide the camera onto
the dual track system with the two notches on the mount facing towards
the back of the camera.
Over tightening may cause damage
to the mount and/or camera
To detach the camera from the main mount, hold the camera with the
lens facing away from you. Press down the mount release switch and pull
the mount towards yourself.
Thread Mount
Screw Mount
Dual Track
Mounting System
Mount Release
Switch
Aiming the Camera when mounted with the thread mount:
When mounting the camera on the handlebars of a bike or with the
vented helmet strap mount follow these steps:
Interchangeable
Mount
1. Consider what you would like to shoot and mount accordingly.
2. Ensure once attached that the camera is aimed straight and not
towards the ground or at the sky.
Reformatting the Micro SD card
Ensure battery is fully charged before formatting
The micro SD card can be reformatted while in the camera. This allows
you to delete all the videos at one time. Follow these steps:
1. Press and hold the micro SD reformat button.
2. Move the RECORD switch to the on position
3. Keep the micro SD card reformat button down until the SD card indicator
begins blinking green.
Aiming the Camera when mounted with the dual track mount:
When mounting the camera on a helmet, you must do the following:
1. Consider what you would like to shoot and mount the camera
accordingly- left side, right side or top.
2. Find a flat surface and ensure the area is clean of dirt and debris.
Remove the cover of the adhesive pad and adhere to the helmet.
3. Once attached, adjust the camera to be sure you are not filming the
sky or the ground.
4. Formatting is complete when the SD card indicator turns on solid.
5. Move the RECORD switch to the off position.
Note: The camera cannot reformat the micro SD card if the low
battery light is on.
5
Downloading Videos
Minimum System Requirements
There is no need to install any software with the XTC300. It is a plug
and play device. With this, follow the below instructions depending upon
whether you have a PC or a MAC.
SD video
HD video
Processor
Ram
2.8 GHz or faster
512 MB or greater
128 MB or greater
3.5 GHz or faster
1 GB or greater
256 MB or greater
Downloading Videos on a PC with a WINDOWS Operating System
1. Connect the camera to the USB port using the included cable.
2. Turn the camera on by moving the RECORD switch to the
record position.
3. The device should automatically install.
4. Operating system
Video Card
Video playback requires H.264 codec. To obtain more information
a. Windows XP
Compatible Systems
i. Open “My Computer”. The camera will be
listed under devices with removable storage.
b. Windows Vista
The XTC300 can be used on both a PC or MAC. Below are the compatible
operating systems:
i. Open “Computer”. The camera will be
listed under devices with removable storage.
c. Windows 7
Windows XP SP2
Windows Vista
Windows 7
i. Open “Computer”. The camera will be
listed under devices with removable storage.
5. Click on the device.
Macintosh OSX 10.4 and higher
For Windows we recommend Windows Media Player 10 or higher.
For Macintosh we recommend Quick Time 6.5 or higher.
6. Open DCIM Folder.
7. Open 100MEDIA folder.
8. Your videos will be in this folder.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by party responsible for compliance could void the user’s authority to
operate the equipment. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with
instructions, it may cause harmful interference to radio
communications. There is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Downloading Video on a MAC
1. Connect the camera to the USB port using the included cable.
2. Turn the camera on by moving the RECORD switch to the record
position.
3. MAC will automatically recognize the camera external hard drive.
4. Click on the icon on the desktop.
5. Open DCIM Folder.
6. Open 100MEDIA folder.
7. Your videos will be in this folder.
8. Drag video files to your hard drive or double click to view.
Increase separation between equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help
6
Tips and Tricks
Tips and Tricks
Problem
Batteries
Solution
Problem
Solution
Video Downloading
Camera not turning on
Make sure battery is fully charged.
Verify the camera is plugged into a USB
2.0 device. If registering as 1.1, unplug
and the re-plug the device.
Recording
Slow data transfer
Make sure the switch is pushed all the
way forward. If the record LED does
not come on, turn off the device and
reinstall the battery.
Remove other unused USB devices.
Ensure record switch is in the record
position while connected to computer.
Camera not recording
Verify available memory.
Computer does not
recognize camera
Ensure the Micro SD card is inserted
properly.
Micro SD card
Ensure the Micro SD card is inserted
properly.
Micro SD card may be corrupted.
Attempt formatting process.
Using Windows, run Check Disk
In the run command type:
chkdsk volume:/f
Micro SD card not reading
Plug camera into the computer to
verify it has available storage.
File won’t transfer off
memory card
then press enter
Attempt formatting process.
Sound
Video Playback
Place piece of tape over microphone
hole.
Verify the camera is plugged into a
USB 2.0 device.
Excessive Wind Noise
Try using the submersible case
Remove other unused USB devices.
Transfer video to computer before
viewing.
Slow or choppy video
Verify computer meets minimum
requirements.
Verify proper codec is installed.
7
Service and Technical Support
LIMITED WARRANTY (United States and Canada)
Subject to the exclusions set forth below, Midland Radio Corporation will repair or replace, at its option without charge, any Midland XTC Action Camera which fails due to a
defect in material or workmanship within One Years following the initial consumer purchase.
This warranty does not apply to water damage, battery leak, abuse or misuse of unauthorized accessories, unauthorized service or modification or altered products. Accessories
have a 90 day warranty from date of purchase, including any chargers, mounts, and cables.
This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting.
ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS
NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR
ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
For Product Purchased in the USA:
Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to:
Midland Radio Corporation
Warranty Service Department
5900 Parretta Drive
Kansas City, MO 64120
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Note: The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military
exchange.
For Product Purchased in Canada:
Performance of any obligation under this warranty may be obtained by returning the warranted product, along with proof of purchase, to your place of purchase in Canada.
This warranty gives you specified legal rights. Additional warranty rights may be provided by law in some areas within Canada.
Service
If you have a problem which you believe requires service, please first check the FAQ section of the website, check your Owner’s Manual, or call and speak with a service techni-
cian. Many problems can be remedied without returning the unit for service. If necessary, return as follows:
Pack the unit in its original box and packing. Then pack the original box in a suitable shipping carton. Caution: Improper packing may result in damage during shipment.
Include the following:
a. Full description of any problems
b. Daytime telephone number, name & address
For warranty service include a photocopy of the bill of sale from an authorized dealer or other proof of purchase showing the date of sale.
You do not need to return accessory items (AC/DC Adapter, Batteries, and Owners Guide) unless they might be directly related to the problem.
Repairs not covered by warranty or units that are over ONE year old are subject to a repair fee. Please call for a quote on repair service cost at 816-241-8500. Send only
cashier’s check, money order, Master Card or Visa card number.
Midland Radio Corporation
5900 Parretta Drive
Kansas City, Missouri 64120
Phone: (816) 241-8500
Fax: (816) 241-5713
E-mail: [email protected]
8
Accessories
Accessories Value Packs
the form on the following page and mail it to our address.
XTA101
XTA106
XTAVP1
XTAVP3
Windshield Suction
Cup Mount
• Durable suction cup sticks
to anything smooth and
stays in place.
Tree Mount
• Mount can be screwed into
a tree at many different
angles.
• $19.99
• $29.99
XTA102
XTA103
XTA107
XTA108
Handlebar Mount
• Durable strap mount fits
all sizes of handlebars.
• $19.99
Visor Mount
• Clips onto the bill of a hat.
• $19.99
Includes:
• Visor Mount
• Bow Mount
• Tree Mount
• Threaded to Slide Adapter
• $49.99
Includes:
• Window Suction cup
Mount
Standard Mount
• Heavy duty adhesive
mount for helmets.
• $19.99
Bow Mount
• Screws into the stabilizer
on a bow.
• Handlebar Mount
• DC Adapter
• Threaded to Slide Adapter
• $59.99
• $19.99
XTAVP2
XTAVP4
XTA302
XTA104
XTA105
Submersible Case
• Watertight case allows for
under water use of the
camera.
• Has double track mount
system so camera
can still be used with
accessories.
Vented Helmet Strap
Mount
• Velcro strap mounts on
vented helmets.
• $14.99
• $29.99
Goggle Mount
• Mounts on the strap of
goggles.
Includes:
• Goggle Mount
• Helmet Mount
• Strap Mount
• Threaded to Slide Adapter
• $49.99
Includes:
• USB cable
• DC adapter (Car Charger)
• AC adapter (Wall Charger)
• $49.99
BATT11L
• $19.99
XTC300 Battery
• 1100mA Lithium-Ion
Battery pack.
• $29.99
Accessories Order Form
Please send Money Order or fill in the Visa/Master Card information and mail to the address
below. Please DO NOT send cash or checks. Make Money Order to Midland Radio Corporation.
Name:_________________________________________________________________________________________________
Address:_______________________________________________________________________________________________
City:__________________________________________________________________State:_________Zip Code:__________
Telephone:____________________________________________________________Email:____________________________
Credit Card#__________________________________________________________ Type:_________Exp:________________
QTY
ITEM
PRICE
$29.99
$19.99
$19.99
$14.99
$19.99
$19.99
$19.99
$19.99
$29.99
$59.99
$49.99
$49.99
$49.99
$29.99
TOTAL
XTA101
XTA102
XTA103
XTA104
XTA105
XTA106
XTA107
XTA108
XTA302
XTAVP1
XTAVP2
XTAVP3
XTAVP4
BATT11L
Mail To:
Midland Radio Corporation
Consumer Dept.
Sub-total
Tax (MO, IL, FL Only)
S&H
______________________
______________________
$14.95
5900 Parretta Drive
Kansas City, MO 64120
______________________________
Or Call 816.241.8500
(Applies to Domestic US only. For Hawaii, Alaska, and Puerto Rico S&H will
be $38.25 for 1 lb. and $64.25 for 2 lb. or more).
______________________________
To order online go to
Total
$
2-Way Radios
Weather Radios
HD Wearable Video Cameras
Bluetooth Headsets
Marine Radios
Emergency Crank Radios
CB Radios
Check out these and other great products at
midlandusa.com
11
MIDLAND RADIO CORPORATION
5900 Parretta Drive
Kansas City, MO 64120
Call 816.241.8500
Revised 10092013
|